The technology to capture micro energy is improving all the time and this got me thinking about manual wheelchairs.  Lots of energy gets transferred through the wheels so could this be captured and re-used?  We have bicycles that charge up a battery when people are going downhill and then assist them when going back up.  Could the same thing be done for wheelchairs?

Views: 229

Reply to This

Replies to This Discussion

One interesting story, David.

This might get the ball rolling.

I knew an engineer who had broken his neck, but was still able to use a manual wheelchair. However, hospital wheelchairs have such skinny spokes, that he felt that he was not achieving much momentum per push. Because of his diminished feeling, he was also prone to damaging the skin on his hands.

He got together with some engineering friends, and they redesigned the wheels. They made the spokes much wider, but hollow, so the chair was no heavier. He could make much more headway with the larger spokes - and tried to tell the NHS about it.....but some fell on stony ground. It was not their problem - they were glad he was happy.

But wheelchairs have fantastic potential for design improvement and energy capture. I'm sorry if my story was simple, but sometimes people get ideas from the simplest of things!

 

Another thing.......

I have just been browsing on the information on stair lifts, which of course were not usable by the engineer mentioned previously.

He was however determined to have minimum disruption in the household, and wanted to remain sleeping in his bedroom upstairs.

How to do it, safely and comply with all the rules and regulations? He did not want to be trapped by fire. Friends again came to his rescue and installed a platform in a cupboard which had access to the upper landing,  and added a  caw the handle  mechanism, with pulley weights was added. There had also been the idea of a covered platform outside the house, (where a window would simply have become a door), to take him upstairs.
It allowed me to see how many ideas are out there once someone has really engaged those that matter in the problem  

He was thrilled with his success, as it gave him the access to all of his house, was not a risk in fire, and was easy for him to operate.

Interesting story Linda

David:
As a design Engineer, I can tell you that regenerative braking on wheelchairs can certainly be done. However, most of the time you won’t normally be riding your brakes when going downhill. Therefore, there is a limited amount of energy that you will actually be able to recover using this approach. And the amount of energy recovered, combined with the high efficiency losses in the system will not justify the added weight of the required motor/generator and storage batteries. (Sadly, you will hopefully have to push the added weight of those components up the hills).
Does that makes sense?

RSS

© 2024   Created by Gordon White.   Powered by

Badges  |  Report an Issue  |  Terms of Service